Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture. Electrical system is double-protected. 25-foot electrical cord. Electrical cord wrap. Recessed wheels and clamps. Filter efficiency 99.5% to 1.0-micron (optional HEPA filter 99.7% to 0.3-micron). Drain outlet. High impact poly construction canister with lifetime canister warranty. Industrial-grade polyolefin wheels with stainless-steel shafts.

Dry areas quickly with this compact, three-speed blower.
Quickly dry carpet, hard floors, fresh paint, concrete sealer and much more.
Ensure durability and many years of use with this blower's rotationally-molded body

Deep clean tough carpet soils in just one pass
Lift dirt out of carpet the first time, every time thanks to double-tuft brush and powerful extraction system.
Easily reach into tight spaces with ultra low-profile design

Using four-pad, random orbit technology, the U-Sand Pro sander makes floor sanding easy and worry-free

Discs Abrasive Mesh Screen 17 120-grit

Discs Abrasive Mesh Screen 17 100-grit

Discs Abrasive Mesh Screen 13 100-grit

Discs Abrasive Mesh Screen 13 60-grit

The PortaJACK-PRO floor tightening jack is a professional tool offering a durable design capable of standing up to the rigors of daily use. Constructed of the best material available and designed with the professional installer in mind, it is a precision built tool that can deliver more than a ton of force and will provide you years of quality service. The PortaJACK-PRO floor tightening jack is designed to hold flooring strips tight and keep in place for nailing. Can also straighten crooked or bowed flooring strips and hold in the nailing position. It can apply more than a ton of force and provide the hold necessary to free the installer’s hands for nailing. The PortaJACK-PRO is designed as one tool that will both push or pull the flooring strips tight. With its removable shoe you can efficiently position the jack on the floor or in the field of flooring without damage to the floor

The easy to use 403 Nailer is the most versatile flooring nailer on the market and comes ready to angle nail 3/8/, 1/2, 5/8, 3/4 and 33/32 In. T & G flooring and will face nail to handle the first and last few strips of flooring. An accessory Nailer Shoe is available for metric flooring including Bamboo ( sold separately) PNI's Preferred-Seating System uses an exclusive ratcheting ram to ensure nails are properly seated to prevent squeaks in the floor. The nail's wide head and grapple barb design provides superior holding power and the patented anti-split nail cuts through wood without splitting your floor. Three lengths of nails will insure you have the right fastener to match up to your sub floor. Porta-Nailers are world-renowned by Pro and DIY Users and are designed to protect pre finished floors and provide the tightest floor possible

With our extensive knowledge of blasting technology, Marco has engineered a line of blast pots that offers durability, portability and simplicity in an efficient, yet economical configuration. The 2.0 pressurized pot is an ASME code pressure vessel, which is required for use in commercial applications Features.•Compact & Portable Design
•Simple to Operate & Maintain •Bantam Metering Valve provides precise metering capabilities •Dish head for hassle free filling •Triangle shaped handle for easy pressurization
•KwikFire 153 Remote Control Switch offers starting & stopping control and a nozzle holder, all-in-one (optional)
•25 ft. of coupled blast hose •Only 30-55 cfm required (3/16” nozzle – operating range 60-125 psi) •Type 1 ceramic nozzles
•Optional moisture separator

17" floor polisher, maintanier will strip, clean, polish and sand with the proper brush, pad or driver

7" Floor edger runs at 3600 RPM is powerful enough for the toughest job and finishes beautifully

The SL8V2 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer to achieve professional results!

36" reduced speed 5.5 Hp gas power trowel

Air Powered 5' chisel scaler, require 6-8 CFM @ 90 PSI

Air Powered 5' ergonomic chisel scaler, require 6-8 CFM @ 90 PSI

3/4Hp-115v Tile Stripper

Door Jamb Saw Kit is a tool designed for the undercutting of jambs, doors, and walls to allow for various types of flooring

Rebar Cutter/Bender is a tool designed to help cut and bend rebar on a job site

JR Power Stretcher Kit is for stretching and flatteneing of carpet

Dry Tape Banjo is for applying drywall tape and mud simultaineously

Heat Iron melts glue for carpet to adhere to

Knee Kicker is for stretching and flattening of carpet